-40%
VALVE COVER SPACERS 3/8

VALVE COVER SPACERS 3/8" BIG BLOCK MOPAR (ALUMINUM HEAD)383, 413, 426 Wedge, 440

$ 71.28

Availability: 18 in stock
  • Fitment Type: Direct Replacement
  • Brand: MEDICEMFG.COM
  • OE Spec or Performance/Custom: Performance/Custom
  • Type: Valve Cover Spacers
  • Country/Region of Manufacture: United States
  • Returns Accepted: ReturnsNotAccepted
  • Manufacturer Part Number: Does Not Apply
  • Condition: New
  • Surface Finish: MILL FINISH
  • Warranty: No Warranty
  • Material: Aluminum

    Description

    3/8 INCH
    THICK BILLET ALUMINUM
    Big Block Mopar Aluminum Head Spacer 3/8" (383, 413, 426 Wedge, 440 - BBM - not 426 Hemi)
    ****For Aluminum Heads with Straight Valve Cover Bolts****
    VALVE COVER SPACERS WITH
    GASKET
    LOK
    FEATURE
    INCLUDES STAINLESS STEEL BOLTS AND WASHERS.
    SOLD IN SETS (TWO SPACERS)
    Made in the U.S.A. from 100% U.S.A. Billet Aluminum.
    Some information about installing our valve cover spacers.
    IF you are using a aftermarket aluminum head with a good machined valve cover surface many people (including myself ) just silicone the spacer to the head .
    IF you are using a cast aluminum valve cover & it is good, flat & straight in the gasket surface then just use Silicone (form-a-gasket) between the spacer &valve cover.
    IF your Head is as cast and rough we recommend using a gasket between the spacer and the head.
    I
    F you are using a tin valve cover (once again MUST be flat) I recommend a gasket between spacer & valve cover.
    MOST IMPORANT everything MUST be clean & MUST use a good quality gasket.
    The BEST silicone I have found is Ford Motorcraft RTV for use on 7.3 Power Stroke Diesel Engines! Motorcraft Part number (TA31). You can get it at your local Ford Dealer .
    We also enclose a information sheet with each set of spacers sold.