VALVE COVER SPACERS 1/2" FORD Cleveland / BOSS 302 With GASKETLOK

Description

1/2 INCH
THICK BILLET ALUMINUM for
Ford Cleveland / BOSS 302
VALVE COVER SPACERS WITH
GASKETLOK
FEATURE
INCLUDES STAINLESS STEEL BOLTS AND WASHERS.
SOLD IN SETS (TWO SPACERS)
Made in the U.S.A. from 100% U.S.A. Billet Aluminum.
Some information about installing our valve cover spacers.
IF you are using a aftermarket aluminum head with a good machined valve cover surface many people (including myself ) just silicone the spacer to the head .
IF you are using a cast aluminum valve cover & it is good, flat & straight in the gasket surface then just use Silicone (form-a-gasket) between the spacer &valve cover.
IF your Head is as cast and rough we recommend using a gasket between the spacer and the head.
I
F you are using a tin valve cover (once again MUST be flat) I recommend a gasket between spacer & valve cover.
MOST IMPORANT everything MUST be clean & MUST use a good quality gasket.
The BEST silicone I have found is Ford Motorcraft RTV for use on 7.3 Power Stroke Diesel Engines! Motorcraft Part number (TA31). You can get it at your local Ford Dealer We also have it available for sale on our eBay store for a tube plus shipping.
We also enclose a information sheet with each set of spacers sold.