-40%
VALVE COVER SPACERS 1/2

VALVE COVER SPACERS 1/2" BIG BLOCK BUICK (400 , 455) GASKETLOK

$ 68.64

Availability: 65 in stock
  • Manufacturer Part Number: Does Not Apply
  • Surface Finish: MILL FINISH
  • Country/Region of Manufacture: United States
  • Warranty: No Warranty
  • Condition: New
  • OE Spec or Performance/Custom: Performance/Custom
  • Returns Accepted: ReturnsNotAccepted
  • Material: Aluminum
  • Brand: MEDICEMFG.COM
  • Type: Valve Cover

    Description

    1/2 INCH
    THICK BILLET ALUMINUM
    BIG BLOCK BUICK 400 , 455
    VALVE COVER SPACERS WITH
    GASKET
    LOK
    FEATURE
    INCLUDES STAINLESS STEEL BOLTS AND WASHERS.
    SOLD IN SETS (TWO SPACERS).
    MADE IN USA WITH USA MATERIALS !
    Some information about installing our valve cover spacers.
    IF you are using a aftermarket aluminum head with a good machined valve cover surface many people (including myself ) just silicone the spacer to the head .
    IF you are using a cast aluminum valve cover & it is good, flat & straight in the gasket surface then just use Silicone (form-a-gasket) between the spacer &valve cover.
    IF your Head is as cast and rough we recommend using a gasket between the spacer and the head.
    I
    F you are using a tin valve cover (once again MUST be flat) I recommend a gasket between spacer & valve cover.
    MOST IMPORANT everything MUST be clean & MUST use a good quality gasket.
    The BEST silicone I have found is Ford Motorcraft RTV for use on 7.3 Power Stroke Diesel Engines! Motorcraft Part number (TA31). You can get it at your local Ford Dealer.
    We also enclose a information sheet with each set of spacers sold.