ProX XT-LS132 14 Ft Lighting Crank Truss Stage Stand Includes T-Adapter Trus...

Description

ProX XT-LS132 14 Ft Lighting Crank Truss Stage Stand Includes T-Adapter Truss Mount 200 Lb. Capacity
The
ProX XT LS132 14FT Lighting Crank Truss Stand
Includes Truss T Adapter with a 200 Lb. Capacity isan integral part of the Truss SQ System for temporarily mounting lights for small to medium sized DJ lighting at any event. It has Integrated castersindependentlyadjustable legbraces and nylon guided leg sliders which can all be used in conjunction with another same rated stand trusses and T Adapters sold separately.
Eachismade with Heavy Duty All metal componentsSturdysteel/aluminumconstruction. Eliminate direct lifting and lowering of heavy loads with the ProXTruss Heavy Duty Crank Stand.
It folds easily to a portable size for transport. It's equipped with a smooth heavy duty cranking mechanism. Perfect for a live band and mobile DJ applications eliminate direct lifting and lowering of heavy loads.
Collapsed it is 65" and raises to14 FT Height
SAFETY INSTRUCTIONS
To avoid problems a competent person should inspect all rigging hardware stands and equipment before each use and periodically do a major inspection for signs of wear abuse and general adequacy as well as perform any manufacturer recommended preventive maintenance on schedule. Observe all warnings and usage instructions in the full manual. Use at your own risk.
Basic Usage
Ensure that the stand is positioned on hard stable surface in suitable location on firm ground and clear of overhead obstacles.
Stabilize legs before lifting the tower or any load.
When outdoors secure the tower with braces or cables in case of wind.
Check the cable it should not show damaged or flattened areas nor broken strands.
Using the Winch
For Lifting the tower turn the winch handle clockwise.
For lowering the tower turn the winch handle counter clockwise.
Safety Notes
Loading on truss and stands should comply with rated weights.
Lock all the safety mechanisms safety pins knobs
Loads must be centered balanced on each lifting unit.
Safety chains must be installed on each item attached to unit.
Leave a safety perimeter with a radius 5ft greater than the maximum height of the stands during lifting and lowering of loads.
During transport close all the sections and lock the lifting carriage.
Do not attempt to move the stand when loaded or in extended position.
Service Notes
Servicing and repairs must be made by qualified persons.
Cable pulleys and telescopic masts must be inspected before each use. Any damaged cable must be replaced immediately.
Annual inspection by an authorized technician is suggested.
Return Policy
Remorse Returns- Return Shipping Buyer Pays + 20% Restocking Fees
For Damaged/defective items received- contact us within 48 hrs of the receipt of the item
Non-availability/ incorrect address we charge restocking fees of 20% + return shipping charges
FREE SHIPPING