Bird 7020-1-030301 USB Broadband Digital RF Power Meter 25-1000 MHz

Description

The 7020 Series Wideband Power Sensor has a broadband frequency performance from 25 MHz to 1.0 GHz and measures power levels up to 150W. The 7020 Sensor was developed as the new thruline sensor that fills the gap between the directional power sensor and the wideband power sensor. It determines and reports Forward and Reflected True Average Power and VSWR.
This is a USB device and can be used with most PCs, tablets, and SmartPhones with a USB input.
7020 Series, 25 MHz - 1 GHz, Basic Power Sensor
is an economical, plug and play solution to your power measurement needs. The 7020 determines and reports Forward and Reflected True Average Power and VSWR over a wide frequency range of 25 MHz to 1.0 GHz. It also never requires field calibration, only requires factory calibration once per year and is traceable to National Institute of Standards and Technology (NIST).
The 7020 Power Sensor Measures:
Analog Cellular, Digital Cellular, 3G, 4G, Tetra, APCO/P25, Trunking, CDMA, TDMA, WCDMA, GSM, Transportation, Tactical Military, Radar, Avionics, Marine, LMR, Analog Broadcast, Digital Broadcast, GSM, GPRS, EDGE, UMTS, HSDPA, Bluetooth, Fire, GPS, NPSPAC, Paging, Project 25, Public Safety, Telematics, Utilities, WIMAX and WLAN.
Standard Accessories
include: Sealatch USB Cable
VPM3 VirtualPower Meter Software
7020 Instruction Manual
VPM3 Instruction Manual
Item No
7020
Item Name
Wideband Power Sensor
Frequency Range
7020-1-030301:
25 MHz - 1.0 GHz
Power Measurement
7020-1-030301:
0.5W to 500W   - True Average Power
Measurement Accuracy
+/- 4% of reading (+ 0.05 W)       - True Average Power
(above 35 °C or below 15 °C add 3%)
Min Forward Power for Reflected Measurement
5.0 W
Peak-Average Ratio
12 dB, Max.
Insertion Loss
0.1 dB, Max.
Insertion VSWR
1.10 Max.
Impedance
50 (nominal)
Response Time
3 sec.
VSWR Range
1.15 to 99.9
Connectors
N (F)
Directivity
28 dB, Min.
Calibration Interval
Annually (Recommended)
Power Supply
Source:
5Vdc from USB host
Current Draw:
35 mA
Interface
Protocol:
USB 2.0
Connector:
USB Type B with SeaLATCH locking USB connector
Data Logging:
with VPM3 Software
Standards Compliance
CE:
European Standard EN 61326-1:2006 Electronic Equipment for Measurement, Control and Laboratory Use EMC Requirements in accordance with EMC Directive (2004/108/EC)
RoHS:
Compliant
Upgradeable
Firmware is Field-Upgradable via the USB Port
Dimensions
4.8 x 2.6 x 1.3 [Nominal]
(122 x 66 x 32mm)
Weight
1.0 lbs (0.45 kg) [Nominal]
Mechanical Shock and Vibration
MIL-PRF-28800F class 3
Operating Temperature
-30 to +60 °C (-22 to +140 °F)
Storage Temperature
-40 to +80 °C (-40 to +176 °F)
Humidity
95% (non-condensing)
Altitude
4,572 m (15,000 ft.)
Questions?
Martin RF Supply
9-5 EST USA