Ansen 120-1003 Big Block Chevy Valve Cover Spacers

Description

Spacer measures a total of 1.125" or 1 1/8" in height, Features a cast, all-aluminum construction, Outside dimensions measure 22-1/8" long and 6-3/4" wide, Inside dimensions measure 21 long and 5-1/2" wide
Ansen 120-1003 Big Block Chevy Valve Cover Spacers
Sku # 1351099
Mfr. Part # 120-1003
Condition
New
Brand
Ansen
Sold
Pair
Details
Info
The perfect finishing touch for your engine.
Specs
BBC Valve Cover Spacer
Spacer is 1.125 or 1 1/8" Thick
22-1/8" outside length
6-3/4" outside width
21" inside length
5-1/2" inside width
California Customers: This part has been identified as emissions sensitive and can only legally be installed on race-use only vehicles, off-road-use only vehicles, or pre-1965 vehicles in the State of California in accordance with the California Air Resource Board (CARB) requirements. Once your order is placed you will be contacted by Speedway Motors within 2 business days so that you can certify that you will only use such parts on these types of vehicles in California.
Specs
Material Type
Aluminum
Sold in Quantity
Pair
Gasket(s) Included
No
Hardware Included
No
Overall Thickness
1.125
Finish
As Cast
Reviews
Just what I needed
Rated
by Josh on April 24, 2021
Summary:
Had to buy these because my stud girdle hit the valve cover . Now I have plenty of clearance. They blend in with the aluminum heads well, so they don't stick out like a sore thumb.
Yes, I recommend this product.
exactly what I needed for my customer
Rated
by Pa Pa Larry on May 21, 2018
Summary:
Have not installed them yet, but I believe the spacers will aid in stooping a major oil leak. Thanks for your help and concern.
Yes, I recommend this product.
Does what it's supposed to do.
Rated
by Camrat on September 02, 2014
Summary:
These works well to give you extra room when you prefer to use stock style valve covers. My spacer set came in bare aluminum. The only thing I wish was different is that the bottom gasket side doesn't have a lip like the stock valve covers to retain the gasket and prevent it from pushing out.
Cons:
bases don't retain the gasket the same as the stoc
Pros:
let's me use factory valve covers again.
they come in bare aluminum so i can paint them eng
Yes, I recommend this product.
Product does what it should do.
Rated
by bob on April 09, 2012
Summary:
Product gave me the rocker arm clearance I needed.
Pros:
Adds needed clearance
Yes, I recommend this product.
needed for the old school look
Rated
by Willy on January 22, 2012
Summary:
This product gives me the room to run roller rockers under My old school valve covers on My Big Block powered Altered
Pros:
Durable
Easy To Install
Yes, I recommend this product.
Related Items / Suggested Parts
Big Block Chevy Fabricated Valve Covers
1965-95 Big Block Chevy Tall Finned Valve Covers
Fel-Pro 1606 B/B Chevy Valve Cover Gaskets 3/16 Inch w/ Non-Steel Core
Edelbrock 4185 1965-Up Big Block Chevy Finned Valve Covers
Shipping
Combined Shipping:
Please take advantage of the “add to cart” button on each listing to get everything in your cart prior to completing checkout. This will ensure you receive a combined shipping rate on your entire order.
Freight Shipping:
Some products are too large for standard ground delivery and must be shipped via truck freight.
Please contact us via eBay Message for a freight shipping estimate.
When possible, please provide a business or commercial address for delivery to eliminate additional fees.
Please ensure the phone number provided is accurate to avoid delays.
Upon delivery, the recipient must inspect the shipment before the driver leaves as there may be concealed damage; please open the carton to inspect the contents. Any visual damage must be noted on the shipping document BEFORE signing for delivery. Any damage not noted before signing for delivery is the buyer’s responsibility. If damage is found, the shipment may be refused, but please contact us as soon as possible and arrangements will be made to have the product replaced and damaged parts returned.
Tech Support
We're here to help before and after your purchase. If you have a question or need assistance with one of our products, please contact us through eBay Messaging and a knowledgeable Speedway Motors team member will be happy to help.
About
Speedway Motors is America’s Oldest Speed Shop® and has been a trusted source for specialty rodding and racing products and friendly expert advice for more than 69 years. Founded in 1952 by “Speedy” Bill Smith – a racer and street rodder himself – Speedway has grown from a one-man operation to become the world’s largest manufacturer, distributor and retailer of street rod and racing products. Our industry-leading fast delivery is the result of same-day shipping from our state-of-the-art, centrally located 500,000 sq. ft. headquarters. Speedway’s size offers customers unmatched product selection and low pricing, while our excellent technical support and customer service have made us a recognized leader in the rodding and racing industries.
Return Policy
We want you to be satisfied with your purchase. If within 60 days after you receive your shipment and you are not satisfied, you may return the item for a refund. Refunds will be processed (1-2) days after the item is received by Speedway. All returned merchandise must be in original factory condition with no modifications or alterations. A restocking fee up to 15% may be applied if items are not in new condition.
Returned merchandise must include all packaging materials, warranty cards, manuals, and accessories. If the items being returned need to be repackaged, there will be a repacking charge. Repack the item in a sturdy box, include a copy of your invoice and complete the form on the back of the invoice. You must ship orders back PREPAID. WE DO NOT ACCEPT COD SHIPMENTS.
All fiberglass items returned will be subject to a 15% restocking charge. No returns on electrical parts, DVDs, and books unless they are defective. Absolutely no returns on special order or closeout merchandise.
Payment
Accepted Payment Methods - PayPal and major credit cards are accepted.
Terms - Immediate payment is required on all listings.
To view states in which sales tax will apply to your order, please visit the “shipping and payments” tab.
Guarantee
Speedway accepts full responsibility for the accuracy of our listings and product representation. If an egregious shipping or description error occurs, we are happy to assist with a replacement or refund.
Disclaimer
Due to our large inventory and the diversity of our product line, the stock photo used may not be an exact representation of the item you are bidding on. Please read all product information carefully before purchase to avoid any order issues.