-40%
AC A/C Compressor w/ Clutch for Sanden SD508 For 1985-1990 Jeep Wrangler CO9537C
AC A/C Compressor w/ Clutch for Sanden SD508 For 1985-1990 Jeep Wrangler CO9537C
AC A/C Compressor w/ Clutch for Sanden SD508 For 1985-1990 Jeep Wrangler CO9537C
AC A/C Compressor w/ Clutch for Sanden SD508 For 1985-1990 Jeep Wrangler CO9537C
AC A/C Compressor w/ Clutch for Sanden SD508 For 1985-1990 Jeep Wrangler CO9537C
AC A/C Compressor w/ Clutch for Sanden SD508 For 1985-1990 Jeep Wrangler CO9537C
AC A/C Compressor w/ Clutch for Sanden SD508 For 1985-1990 Jeep Wrangler CO9537C
AC A/C Compressor w/ Clutch for Sanden SD508 For 1985-1990 Jeep Wrangler CO9537C
AC A/C Compressor w/ Clutch for Sanden SD508 For 1985-1990 Jeep Wrangler CO9537C
AC A/C Compressor w/ Clutch for Sanden SD508 For 1985-1990 Jeep Wrangler CO9537C
AC A/C Compressor w/ Clutch for Sanden SD508 For 1985-1990 Jeep Wrangler CO9537C
AC A/C Compressor w/ Clutch for Sanden SD508 For 1985-1990 Jeep Wrangler CO9537C

AC A/C Compressor w/ Clutch for Sanden SD508 For 1985-1990 Jeep Wrangler CO9537C

$ 42.25

Availability: 126 in stock
  • Material: Iron and Aluminum
  • Fitment Type: Direct Replacement
  • Brand: LEDKINGDOMUS
  • Manufacturer Part Number: E03OG19021
  • Type: A/C Compressor
  • Fitting: O Ring
  • Condition: New
  • Refund will be given as: Money Back
  • Warranty: 1 Year
  • Placement on Vehicle: Front
  • Interchange Part Number: SD508,CO 9537C,9537,1521110,10301731,2789632
  • Item must be returned within: 30 Days
  • Pre-filled Oil: 100ml
  • UPC: 764283192196
  • Returns Accepted: Returns Accepted
  • Return shipping will be paid by: Seller
  • Clutch: w/ Clutch

    Description

    A/C Compressor w/ Clutch for Sanden SD508 For 1985-1990 Jeep Wrangler CO9537C
    Item Description:
    NOTE: Each AC air compressor comes with 100ML of Oil. You dont need to add oil additionally.
    Installation
    Attention Please:
    Be sure to clean the air conditioning system before installation, otherwise it will cause compression broken.
    1. Once the old compressor has been removed, begin by removing the receiver/drier or accumulator, and the expansion valve or orifice tube from the vehicle.
    2. Next, flush the condenser and evaporator using a non-oil based A/C flush. The valve must be removed on expansion valve system before the evaporator can be flushed.
    · Flush evaporators from inlet to outlet.
    3. Install the new receiver drier or accumulator, and new expansion valve or orifice tube.
    4. Next, install the new or remanufactured A/C Compressor.
    5. Install and tighten the A/C Compressor mounting bolts.
    6. Reconnect any electrical connectors to the A/C Compressor.
    7. Re-install the refrigerant lines and A/C belt to the A/C Compressor.
    8. Reconnect the negative battery cable.
    9. Evacuate the A/C system with an A/C servicing machine for at least one hour.
    10. Check the system for leaks.
    11. If there are no leaks, install the refrigerant charge (Check the A/C system sticker under the hood of the vehicle for the proper amount and type of refrigerant for the system). Then, let the system set for 2 minutes. Doing so will allow the refrigerant to carry the oil and spread more evenly throughout the system.
    12. Start the vehicle’s engine and turn on the A/C system.
    Note:
    To confirm that this part fits your vehicle, enter your vehicle's Year, Make, Model, Trim and Engine in the Compatibility Table.
    Please make sure the plug is the same as your old one
    Pay attention：
    This compressor comes pre-filled with the correct amount of oil.
    Thus, there is no need to add any additional oil to your system.
    Please add refrigerant to 70-80% without filling up.
    There may be noise if the refrigerant is added too much.
    Be sure to clean the air conditioning system before installation, otherwise it will cause compression broken.
    Package includes:
    1pc  A/C Compressor
    More Display:
    On Jul-22-20 at 01:39:25 PDT, seller added the following information: